I ordered two different kinds of misters for my greenhouse. This one took some assembly, so install time was a little longer (maybe 30 minutes), but the overall result was so much better.1. You need to cut and assemble the tubing. This turned out to be a big positive, since I was able to get the misters exactly where I wanted them -- at each frame member under the greenhouse roof. The quick attach (and quick detach) couplers were simple.2. The tubing is an exact fit inside the greenhouse hanger clips. This made mounting easy and secure, since the horizontal run of tubing also keeps the hangers from rotating loose. With the other mister system, I zip-tied to the clips, which allows the clips to rotate loose, and does a poor job of aligning the misters.3. The bendable nozzles are a good length. Where the nozzles aligned with diagonal roof braces, I zip-tied the upper section of the nozzle to the roof brace and then put a dogleg into the nozzle to aim the spray. Having half the nozzles zip-tied holds the entire line of nozzles relatively stable, so even the nozzles without zip ties hold their position.I'll try to remember to add a picture to this review.